Authoritative definitions of the International System of Units and SI prefixes.
Dedicated unit pair
Square metres to Square feet
Convert m² to ft² instantly, then review the formula, assumptions, and rounding guidance.
AreaInstant result
Decimals
Formula result = input × 1 ÷ 0.09290304. 1 m² = 10.7639 ft²
Common examples
One value, several units
Square kilometres0 km²
Square centimetres10,000 cm²
Hectares0.0001 ha
Acres0.0002 ac
Square feet10.7639 ft²
Square inches1,550.0031 in²
Square miles0 mi²
Conversion table
| m² | ft² |
|---|---|
| 1 m² | 10.7639 ft² |
| 2 m² | 21.5278 ft² |
| 5 m² | 53.8196 ft² |
| 10 m² | 107.6391 ft² |
| 25 m² | 269.0978 ft² |
| 50 m² | 538.1955 ft² |
| 100 m² | 1,076.391 ft² |
Conversion chart
1 m²10.7639 ft²
5 m²53.8196 ft²
10 m²107.6391 ft²
25 m²269.0978 ft²
50 m²538.1955 ft²
Worked example
1 hectare equals 10,000 square metres.
Unit definition
Square metres (m²) One square metres equals 1 square metre.
Unit history
Square metres is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert m² to square metre.
3. Convert the base value to ft² and apply your display precision.
Understand the result before using it
Square metres to Square feet converts a value measured in Square metres (m²) into the equivalent value in Square feet (ft²). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1 ÷ 0.09290304
Assumptions
- Square metres and Square feet represent the same area quantity.
- The input is expressed in m²; the output is expressed in ft².
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 m² = 10.7639104167 ft². For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a m² measurement in a document that expects ft².
- Compare a square metres value with a value reported in square feet.
- Check the m²-to-ft² arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not apply a linear length factor directly to area; the length factor must be squared.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Square metres to Square feet?
result = input × 1 ÷ 0.09290304 Using the displayed relationship, 1 m² equals 10.7639104167 ft².
How many Square feet are in one Square metres?
One Square metres is 10.7639104167 Square feet. The displayed digits may be rounded.
Can I reverse the m² to ft² conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts ft² back to m².
Is the Square metres to Square feet result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.