Authoritative definitions of the International System of Units and SI prefixes.
Dedicated unit pair
Grams per cubic centimetre to Kilograms per cubic metre
Convert g/cm³ to kg/m³ instantly, then review the formula, assumptions, and rounding guidance.
DensityInstant result
Decimals
Formula result = input × 1000 ÷ 1. 1 g/cm³ = 1,000 kg/m³
Common examples
One value, several units
Kilograms per cubic metre1,000 kg/m³
Kilograms per litre1 kg/L
Pounds per cubic foot62.428 lb/ft³
Pounds per US gallon8.3454 lb/gal
Conversion table
| g/cm³ | kg/m³ |
|---|---|
| 1 g/cm³ | 1,000 kg/m³ |
| 2 g/cm³ | 2,000 kg/m³ |
| 5 g/cm³ | 5,000 kg/m³ |
| 10 g/cm³ | 10,000 kg/m³ |
| 25 g/cm³ | 25,000 kg/m³ |
| 50 g/cm³ | 50,000 kg/m³ |
| 100 g/cm³ | 100,000 kg/m³ |
Conversion chart
1 g/cm³1,000 kg/m³
5 g/cm³5,000 kg/m³
10 g/cm³10,000 kg/m³
25 g/cm³25,000 kg/m³
50 g/cm³50,000 kg/m³
Worked example
Water is approximately 1,000 kg/m³.
Unit definition
Grams per cubic centimetre (g/cm³) One grams per cubic centimetre equals 1,000 kilogram per cubic metre.
Unit history
Grams per cubic centimetre is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert g/cm³ to kilogram per cubic metre.
3. Convert the base value to kg/m³ and apply your display precision.
Understand the result before using it
Grams per cubic centimetre to Kilograms per cubic metre converts a value measured in Grams per cubic centimetre (g/cm³) into the equivalent value in Kilograms per cubic metre (kg/m³). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1000 ÷ 1
Assumptions
- Grams per cubic centimetre and Kilograms per cubic metre represent the same density quantity.
- The input is expressed in g/cm³; the output is expressed in kg/m³.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 g/cm³ = 1,000 kg/m³. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a g/cm³ measurement in a document that expects kg/m³.
- Compare a grams per cubic centimetre value with a value reported in kilograms per cubic metre.
- Check the g/cm³-to-kg/m³ arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- A material's density can change with temperature, pressure, composition, and moisture content.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Grams per cubic centimetre to Kilograms per cubic metre?
result = input × 1000 ÷ 1 Using the displayed relationship, 1 g/cm³ equals 1,000 kg/m³.
How many Kilograms per cubic metre are in one Grams per cubic centimetre?
One Grams per cubic centimetre is 1,000 Kilograms per cubic metre. The displayed digits may be rounded.
Can I reverse the g/cm³ to kg/m³ conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts kg/m³ back to g/cm³.
Is the Grams per cubic centimetre to Kilograms per cubic metre result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.