Authoritative definitions of the International System of Units and SI prefixes.
Dedicated unit pair
Nanofarads to Picofarads
Convert nF to pF instantly, then review the formula, assumptions, and rounding guidance.
Electrical unitsInstant result
Decimals
Formula result = input × 1e-9 ÷ 1e-12. 1 nF = 1,000 pF
Common examples
One value, several units
Farads0 F
Millifarads0 mF
Microfarads0.001 µF
Picofarads1,000 pF
Conversion table
| nF | pF |
|---|---|
| 1 nF | 1,000 pF |
| 2 nF | 2,000 pF |
| 5 nF | 5,000 pF |
| 10 nF | 10,000 pF |
| 25 nF | 25,000 pF |
| 50 nF | 50,000 pF |
| 100 nF | 100,000 pF |
Conversion chart
1 nF1,000 pF
5 nF5,000 pF
10 nF10,000 pF
25 nF25,000 pF
50 nF50,000 pF
Worked example
1 microfarad equals 1,000 nanofarads.
Unit definition
Nanofarads (nF) One nanofarads equals 0.000000001 farad.
Unit history
Nanofarads is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert nF to farad.
3. Convert the base value to pF and apply your display precision.
Understand the result before using it
Nanofarads to Picofarads converts a value measured in Nanofarads (nF) into the equivalent value in Picofarads (pF). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1e-9 ÷ 1e-12
Assumptions
- Nanofarads and Picofarads represent the same capacitance quantity.
- The input is expressed in nF; the output is expressed in pF.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 nF = 1,000 pF. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a nF measurement in a document that expects pF.
- Compare a nanofarads value with a value reported in picofarads.
- Check the nF-to-pF arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse nF with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Nanofarads to Picofarads?
result = input × 1e-9 ÷ 1e-12 Using the displayed relationship, 1 nF equals 1,000 pF.
How many Picofarads are in one Nanofarads?
One Nanofarads is 1,000 Picofarads. The displayed digits may be rounded.
Can I reverse the nF to pF conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts pF back to nF.
Is the Nanofarads to Picofarads result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.