Authoritative definitions of the International System of Units and SI prefixes.
Dedicated unit pair
Microvolts to Millivolts
Convert µV to mV instantly, then review the formula, assumptions, and rounding guidance.
Electrical unitsInstant result
Decimals
Formula result = input × 0.000001 ÷ 0.001. 1 µV = 0.001 mV
Common examples
One value, several units
Volts0 V
Millivolts0.001 mV
Kilovolts0 kV
Conversion table
| µV | mV |
|---|---|
| 1 µV | 0.001 mV |
| 2 µV | 0.002 mV |
| 5 µV | 0.005 mV |
| 10 µV | 0.01 mV |
| 25 µV | 0.025 mV |
| 50 µV | 0.05 mV |
| 100 µV | 0.1 mV |
Conversion chart
1 µV0.001 mV
5 µV0.005 mV
10 µV0.01 mV
25 µV0.025 mV
50 µV0.05 mV
Worked example
1 kilovolt equals 1,000 volts.
Unit definition
Microvolts (µV) One microvolts equals 0.000001 volt.
Unit history
Microvolts is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert µV to volt.
3. Convert the base value to mV and apply your display precision.
Understand the result before using it
Microvolts to Millivolts converts a value measured in Microvolts (µV) into the equivalent value in Millivolts (mV). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.000001 ÷ 0.001
Assumptions
- Microvolts and Millivolts represent the same voltage quantity.
- The input is expressed in µV; the output is expressed in mV.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 µV = 0.001 mV. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a µV measurement in a document that expects mV.
- Compare a microvolts value with a value reported in millivolts.
- Check the µV-to-mV arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse µV with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Microvolts to Millivolts?
result = input × 0.000001 ÷ 0.001 Using the displayed relationship, 1 µV equals 0.001 mV.
How many Millivolts are in one Microvolts?
One Microvolts is 0.001 Millivolts. The displayed digits may be rounded.
Can I reverse the µV to mV conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts mV back to µV.
Is the Microvolts to Millivolts result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.