Authoritative definitions of the International System of Units and SI prefixes.
Dedicated unit pair
Joules to BTU (International Table)
Convert J to BTU instantly, then review the formula, assumptions, and rounding guidance.
Energy, work, heat & powerInstant result
Decimals
Formula result = input × 1 ÷ 1055.05585262. 1 J = 0.0009 BTU
Common examples
One value, several units
Kilojoules0.001 kJ
Megajoules0 MJ
Watt-hours0.0003 Wh
Kilowatt-hours0 kWh
Thermochemical calories0.239 cal
Kilocalories0.0002 kcal
BTU (International Table)0.0009 BTU
Conversion table
| J | BTU |
|---|---|
| 1 J | 0.0009 BTU |
| 2 J | 0.0019 BTU |
| 5 J | 0.0047 BTU |
| 10 J | 0.0095 BTU |
| 25 J | 0.0237 BTU |
| 50 J | 0.0474 BTU |
| 100 J | 0.0948 BTU |
Conversion chart
1 J0.0009 BTU
5 J0.0047 BTU
10 J0.0095 BTU
25 J0.0237 BTU
50 J0.0474 BTU
Worked example
1 kilowatt-hour equals exactly 3.6 megajoules.
Unit definition
Joules (J) One joules equals 1 joule.
Unit history
The joule is named for James Prescott Joule and is the SI unit of energy, equal to one newton metre.
Step by step
1. Parse the value, including fractions.
2. Convert J to joule.
3. Convert the base value to BTU and apply your display precision.
Understand the result before using it
Joules to BTU (International Table) converts a value measured in Joules (J) into the equivalent value in BTU (International Table) (BTU). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1 ÷ 1055.05585262
Assumptions
- Joules and BTU (International Table) represent the same energy, work & heat quantity.
- The input is expressed in J; the output is expressed in BTU.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 J = 0.000947817120313 BTU. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a J measurement in a document that expects BTU.
- Compare a joules value with a value reported in btu (international table).
- Check the J-to-BTU arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse J with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Joules to BTU (International Table)?
result = input × 1 ÷ 1055.05585262 Using the displayed relationship, 1 J equals 0.000947817120313 BTU.
How many BTU (International Table) are in one Joules?
One Joules is 0.000947817120313 BTU (International Table). The displayed digits may be rounded.
Can I reverse the J to BTU conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts BTU back to J.
Is the Joules to BTU (International Table) result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.