Authoritative definitions of the International System of Units and SI prefixes.
Dedicated unit pair
Litres per minute to Cubic metres per second
Convert L/min to m³/s instantly, then review the formula, assumptions, and rounding guidance.
Flow rateInstant result
Decimals
Formula result = input × 0.000016666666666666667 ÷ 1. 1 L/min = 0 m³/s
Common examples
One value, several units
Cubic metres per second0 m³/s
Litres per second0.0167 L/s
Cubic metres per hour0.06 m³/h
US gallons per minute0.2642 gpm
Cubic feet per minute0.0353 cfm
Conversion table
| L/min | m³/s |
|---|---|
| 1 L/min | 0 m³/s |
| 2 L/min | 0 m³/s |
| 5 L/min | 0.0001 m³/s |
| 10 L/min | 0.0002 m³/s |
| 25 L/min | 0.0004 m³/s |
| 50 L/min | 0.0008 m³/s |
| 100 L/min | 0.0017 m³/s |
Conversion chart
1 L/min0 m³/s
5 L/min0.0001 m³/s
10 L/min0.0002 m³/s
25 L/min0.0004 m³/s
50 L/min0.0008 m³/s
Worked example
60 litres per minute equals 1 litre per second.
Unit definition
Litres per minute (L/min) One litres per minute equals 0.0000166666666667 cubic metre per second.
Unit history
Litres per minute is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert L/min to cubic metre per second.
3. Convert the base value to m³/s and apply your display precision.
Understand the result before using it
Litres per minute to Cubic metres per second converts a value measured in Litres per minute (L/min) into the equivalent value in Cubic metres per second (m³/s). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.000016666666666666667 ÷ 1
Assumptions
- Litres per minute and Cubic metres per second represent the same flow rate quantity.
- The input is expressed in L/min; the output is expressed in m³/s.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 L/min = 0.0000166666666667 m³/s. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a L/min measurement in a document that expects m³/s.
- Compare a litres per minute value with a value reported in cubic metres per second.
- Check the L/min-to-m³/s arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse L/min with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Litres per minute to Cubic metres per second?
result = input × 0.000016666666666666667 ÷ 1 Using the displayed relationship, 1 L/min equals 0.0000166666666667 m³/s.
How many Cubic metres per second are in one Litres per minute?
One Litres per minute is 0.0000166666666667 Cubic metres per second. The displayed digits may be rounded.
Can I reverse the L/min to m³/s conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts m³/s back to L/min.
Is the Litres per minute to Cubic metres per second result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.