Authoritative definitions of the International System of Units and SI prefixes.
Dedicated unit pair
Cubic metres per second to Cubic metres per hour
Convert m³/s to m³/h instantly, then review the formula, assumptions, and rounding guidance.
Flow rateInstant result
Decimals
Formula result = input × 1 ÷ 0.0002777777777777778. 1 m³/s = 3,600 m³/h
Common examples
One value, several units
Litres per second1,000 L/s
Litres per minute60,000 L/min
Cubic metres per hour3,600 m³/h
US gallons per minute15,850.3231 gpm
Cubic feet per minute2,118.88 cfm
Conversion table
| m³/s | m³/h |
|---|---|
| 1 m³/s | 3,600 m³/h |
| 2 m³/s | 7,200 m³/h |
| 5 m³/s | 18,000 m³/h |
| 10 m³/s | 36,000 m³/h |
| 25 m³/s | 90,000 m³/h |
| 50 m³/s | 180,000 m³/h |
| 100 m³/s | 360,000 m³/h |
Conversion chart
1 m³/s3,600 m³/h
5 m³/s18,000 m³/h
10 m³/s36,000 m³/h
25 m³/s90,000 m³/h
50 m³/s180,000 m³/h
Worked example
60 litres per minute equals 1 litre per second.
Unit definition
Cubic metres per second (m³/s) One cubic metres per second equals 1 cubic metre per second.
Unit history
Cubic metres per second is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert m³/s to cubic metre per second.
3. Convert the base value to m³/h and apply your display precision.
Understand the result before using it
Cubic metres per second to Cubic metres per hour converts a value measured in Cubic metres per second (m³/s) into the equivalent value in Cubic metres per hour (m³/h). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1 ÷ 0.0002777777777777778
Assumptions
- Cubic metres per second and Cubic metres per hour represent the same flow rate quantity.
- The input is expressed in m³/s; the output is expressed in m³/h.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 m³/s = 3,600 m³/h. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a m³/s measurement in a document that expects m³/h.
- Compare a cubic metres per second value with a value reported in cubic metres per hour.
- Check the m³/s-to-m³/h arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Do not confuse m³/s with another unit that has a similar name or symbol.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Cubic metres per second to Cubic metres per hour?
result = input × 1 ÷ 0.0002777777777777778 Using the displayed relationship, 1 m³/s equals 3,600 m³/h.
How many Cubic metres per hour are in one Cubic metres per second?
One Cubic metres per second is 3,600 Cubic metres per hour. The displayed digits may be rounded.
Can I reverse the m³/s to m³/h conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts m³/h back to m³/s.
Is the Cubic metres per second to Cubic metres per hour result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.