Authoritative definitions of the International System of Units and SI prefixes.
Dedicated unit pair
Sieverts to Microsieverts
Convert Sv to µSv instantly, then review the formula, assumptions, and rounding guidance.
Radiation unitsInstant result
Decimals
Formula result = input × 1 ÷ 0.000001. 1 Sv = 1,000,000 µSv
Common examples
One value, several units
Millisieverts1,000 mSv
Microsieverts1,000,000 µSv
Rem100 rem
Conversion table
| Sv | µSv |
|---|---|
| 1 Sv | 1,000,000 µSv |
| 2 Sv | 2,000,000 µSv |
| 5 Sv | 5,000,000 µSv |
| 10 Sv | 10,000,000 µSv |
| 25 Sv | 25,000,000 µSv |
| 50 Sv | 50,000,000 µSv |
| 100 Sv | 100,000,000 µSv |
Conversion chart
1 Sv1,000,000 µSv
5 Sv5,000,000 µSv
10 Sv10,000,000 µSv
25 Sv25,000,000 µSv
50 Sv50,000,000 µSv
Worked example
1 sievert equals 100 rem.
Unit definition
Sieverts (Sv) One sieverts equals 1 sievert.
Unit history
Sieverts is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert Sv to sievert.
3. Convert the base value to µSv and apply your display precision.
Important
Equivalent dose already includes the applicable radiation weighting factor.
Understand the result before using it
Sieverts to Microsieverts converts a value measured in Sieverts (Sv) into the equivalent value in Microsieverts (µSv). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 1 ÷ 0.000001
Assumptions
- Sieverts and Microsieverts represent the same equivalent dose quantity.
- The input is expressed in Sv; the output is expressed in µSv.
- Equivalent dose already includes the applicable radiation weighting factor.
Worked example
1 Sv = 1,000,000 µSv. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a Sv measurement in a document that expects µSv.
- Compare a sieverts value with a value reported in microsieverts.
- Check the Sv-to-µSv arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Absorbed dose, equivalent dose, and activity describe different radiation quantities and are not interchangeable.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Sieverts to Microsieverts?
result = input × 1 ÷ 0.000001 Using the displayed relationship, 1 Sv equals 1,000,000 µSv.
How many Microsieverts are in one Sieverts?
One Sieverts is 1,000,000 Microsieverts. The displayed digits may be rounded.
Can I reverse the Sv to µSv conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts µSv back to Sv.
Is the Sieverts to Microsieverts result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.