Authoritative definitions of the International System of Units and SI prefixes.
Dedicated unit pair
Centimetres per second squared to Standard gravity
Convert cm/s² to g₀ instantly, then review the formula, assumptions, and rounding guidance.
Speed & accelerationInstant result
Decimals
Formula result = input × 0.01 ÷ 9.80665. 1 cm/s² = 0.001 g₀
Common examples
One value, several units
Metres per second squared0.01 m/s²
Feet per second squared0.0328 ft/s²
Gal1 Gal
Standard gravity0.001 g₀
Conversion table
| cm/s² | g₀ |
|---|---|
| 1 cm/s² | 0.001 g₀ |
| 2 cm/s² | 0.002 g₀ |
| 5 cm/s² | 0.0051 g₀ |
| 10 cm/s² | 0.0102 g₀ |
| 25 cm/s² | 0.0255 g₀ |
| 50 cm/s² | 0.051 g₀ |
| 100 cm/s² | 0.102 g₀ |
Conversion chart
1 cm/s²0.001 g₀
5 cm/s²0.0051 g₀
10 cm/s²0.0102 g₀
25 cm/s²0.0255 g₀
50 cm/s²0.051 g₀
Worked example
Standard gravity is exactly 9.80665 m/s².
Unit definition
Centimetres per second squared (cm/s²) One centimetres per second squared equals 0.01 metre per second squared.
Unit history
Centimetres per second squared is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert cm/s² to metre per second squared.
3. Convert the base value to g₀ and apply your display precision.
Understand the result before using it
Centimetres per second squared to Standard gravity converts a value measured in Centimetres per second squared (cm/s²) into the equivalent value in Standard gravity (g₀). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.01 ÷ 9.80665
Assumptions
- Centimetres per second squared and Standard gravity represent the same acceleration quantity.
- The input is expressed in cm/s²; the output is expressed in g₀.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 cm/s² = 0.00101971621298 g₀. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a cm/s² measurement in a document that expects g₀.
- Compare a centimetres per second squared value with a value reported in standard gravity.
- Check the cm/s²-to-g₀ arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Mach varies with the local speed of sound; this tool uses the representative condition stated beside the converter.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Centimetres per second squared to Standard gravity?
result = input × 0.01 ÷ 9.80665 Using the displayed relationship, 1 cm/s² equals 0.00101971621298 g₀.
How many Standard gravity are in one Centimetres per second squared?
One Centimetres per second squared is 0.00101971621298 Standard gravity. The displayed digits may be rounded.
Can I reverse the cm/s² to g₀ conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts g₀ back to cm/s².
Is the Centimetres per second squared to Standard gravity result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.