Authoritative definitions of the International System of Units and SI prefixes.
Dedicated unit pair
Feet per second to Knots
Convert ft/s to kn instantly, then review the formula, assumptions, and rounding guidance.
Speed & accelerationInstant result
Decimals
Formula result = input × 0.3048 ÷ 0.5144444444. 1 ft/s = 0.5925 kn
Common examples
One value, several units
Metres per second0.3048 m/s
Kilometres per hour1.0973 km/h
Miles per hour0.6818 mph
Knots0.5925 kn
Mach (standard atmosphere)0.0009 Ma
Conversion table
| ft/s | kn |
|---|---|
| 1 ft/s | 0.5925 kn |
| 2 ft/s | 1.185 kn |
| 5 ft/s | 2.9624 kn |
| 10 ft/s | 5.9248 kn |
| 25 ft/s | 14.8121 kn |
| 50 ft/s | 29.6242 kn |
| 100 ft/s | 59.2484 kn |
Conversion chart
1 ft/s0.5925 kn
5 ft/s2.9624 kn
10 ft/s5.9248 kn
25 ft/s14.8121 kn
50 ft/s29.6242 kn
Worked example
100 km/h is approximately 62.137 mph.
Unit definition
Feet per second (ft/s) One feet per second equals 0.3048 metre per second.
Unit history
Feet per second is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert ft/s to metre per second.
3. Convert the base value to kn and apply your display precision.
Important
Mach uses 343 m/s, a representative dry-air value near 20 °C.
Understand the result before using it
Feet per second to Knots converts a value measured in Feet per second (ft/s) into the equivalent value in Knots (kn). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.3048 ÷ 0.5144444444
Assumptions
- Feet per second and Knots represent the same speed quantity.
- The input is expressed in ft/s; the output is expressed in kn.
- Mach uses 343 m/s, a representative dry-air value near 20 °C.
Worked example
1 ft/s = 0.592483801347 kn. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a ft/s measurement in a document that expects kn.
- Compare a feet per second value with a value reported in knots.
- Check the ft/s-to-kn arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Mach varies with the local speed of sound; this tool uses the representative condition stated beside the converter.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Feet per second to Knots?
result = input × 0.3048 ÷ 0.5144444444 Using the displayed relationship, 1 ft/s equals 0.592483801347 kn.
How many Knots are in one Feet per second?
One Feet per second is 0.592483801347 Knots. The displayed digits may be rounded.
Can I reverse the ft/s to kn conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts kn back to ft/s.
Is the Feet per second to Knots result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.