Authoritative definitions of the International System of Units and SI prefixes.
Dedicated unit pair
Feet per second squared to Gal
Convert ft/s² to Gal instantly, then review the formula, assumptions, and rounding guidance.
Speed & accelerationInstant result
Decimals
Formula result = input × 0.3048 ÷ 0.01. 1 ft/s² = 30.48 Gal
Common examples
One value, several units
Metres per second squared0.3048 m/s²
Centimetres per second squared30.48 cm/s²
Gal30.48 Gal
Standard gravity0.0311 g₀
Conversion table
| ft/s² | Gal |
|---|---|
| 1 ft/s² | 30.48 Gal |
| 2 ft/s² | 60.96 Gal |
| 5 ft/s² | 152.4 Gal |
| 10 ft/s² | 304.8 Gal |
| 25 ft/s² | 762 Gal |
| 50 ft/s² | 1,524 Gal |
| 100 ft/s² | 3,048 Gal |
Conversion chart
1 ft/s²30.48 Gal
5 ft/s²152.4 Gal
10 ft/s²304.8 Gal
25 ft/s²762 Gal
50 ft/s²1,524 Gal
Worked example
Standard gravity is exactly 9.80665 m/s².
Unit definition
Feet per second squared (ft/s²) One feet per second squared equals 0.3048 metre per second squared.
Unit history
Feet per second squared is represented here using its modern SI definition or an internationally accepted relationship to an SI base unit.
Step by step
1. Parse the value, including fractions.
2. Convert ft/s² to metre per second squared.
3. Convert the base value to Gal and apply your display precision.
Understand the result before using it
Feet per second squared to Gal converts a value measured in Feet per second squared (ft/s²) into the equivalent value in Gal (Gal). The numerical value changes because the size and definition of the selected unit changes; the underlying quantity does not.
Calculated result
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.
Formula, assumptions, and example
Formula
result = input × 0.3048 ÷ 0.01
Assumptions
- Feet per second squared and Gal represent the same acceleration quantity.
- The input is expressed in ft/s²; the output is expressed in Gal.
- The unit definitions and conventional relationship shown on this page apply.
Worked example
1 ft/s² = 30.48 Gal. For another value, apply the same relationship and round only to the precision your source measurement supports.
When to use it
Good uses
- Read a ft/s² measurement in a document that expects Gal.
- Compare a feet per second squared value with a value reported in gal.
- Check the ft/s²-to-Gal arithmetic before copying the result into another calculation.
Limitations
Common mistakes to avoid
- Mach varies with the local speed of sound; this tool uses the representative condition stated beside the converter.
- Round the output to a precision justified by the original measurement.
- Verify safety-critical, regulated, laboratory, and contractual conversions against the controlling standard.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
Guidance on unit names, symbols, conversions, and numerical presentation.
Questions about this calculation
How do I convert Feet per second squared to Gal?
result = input × 0.3048 ÷ 0.01 Using the displayed relationship, 1 ft/s² equals 30.48 Gal.
How many Gal are in one Feet per second squared?
One Feet per second squared is 30.48 Gal. The displayed digits may be rounded.
Can I reverse the ft/s² to Gal conversion?
Yes. Swap the source and target units in the converter. The reverse relationship converts Gal back to ft/s².
Is the Feet per second squared to Gal result exact?
The conversion follows the displayed unit relationship. Display rounding can hide additional digits, and measured inputs cannot become more accurate merely by changing units.