Reference guidance for SI quantities, symbols, and conversions.
Engineering
Section properties
Enter your values below for a clear, instant result.
Your result
mm² area
Centroidal I66,666,666.67 mm⁴
Section modulus666,666.67 mm³
Radius of gyration57.74 mm
FormulaA and I follow the selected solid-section geometry; Z=I/c and r=√(I/A).
- Enter the known values.
- Apply the displayed formula.
- Review the result and supporting values.
Worked example: Results are centroidal properties for solid rectangle, solid circle, or concentric tube.
Estimate notice: This section properties result is an estimate based only on the values and assumptions shown. Verify important decisions with the relevant official source or a qualified professional.
Understand the result before using it
Section properties uses section, width / outer diameter, and height / inner diameter to calculate its result. It applies a stated engineering relationship to idealized dimensions or material values entered by the user.
Formula, assumptions, and example
Formula
A and I follow the selected solid-section geometry; Z=I/c and r=√(I/A).
Assumptions
- The entered section, width / outer diameter, and height / inner diameter are complete, valid, and use the units or format shown beside each field.
- Geometry, loading, boundary conditions, and material properties match the simplified model.
- User-entered properties come from an applicable specification or test certificate.
Worked example
Results are centroidal properties for solid rectangle, solid circle, or concentric tube.
When to use it
Good uses
- Perform a preliminary calculation or independent arithmetic check.
- Compare candidate dimensions, materials, or unit systems.
- Document the assumptions to verify later against the controlling standard.
Limitations
Common mistakes to avoid
- The calculation does not select safety factors, evaluate failure modes, certify materials, or check regulatory compliance.
- Never treat a generic property or hardness conversion as a substitute for testing and professional design review.
- Check the formula, source data, units, and displayed precision before relying on the result.
Sources and further reading
These references explain the underlying standards or provide authoritative context. Your own contract, institution, clinician, product documentation, local code, or governing standard may be the controlling source.
The controlling sources for properties, tolerances, test methods, and acceptance criteria.
Questions about this calculation
What does the Section properties calculate?
Section properties uses section, width / outer diameter, and height / inner diameter to calculate its result. It applies a stated engineering relationship to idealized dimensions or material values entered by the user. The formula used is: A and I follow the selected solid-section geometry; Z=I/c and r=√(I/A).
Which inputs affect the Section properties result?
The result uses section, width / outer diameter, and height / inner diameter. Changing any of these values can change the output, so enter them using the labels and units shown.
Is the Section properties result exact?
This section properties result is an estimate based only on the values and assumptions shown. Verify important decisions with the relevant official source or a qualified professional.
When should I verify a Section properties result?
Verify it before any financial, health, academic, construction, safety, or engineering decision. Use the primary source or an appropriately qualified professional.
Clear answers, without the guesswork
1Enter your information
Use the fields above. Results refresh automatically as values change.
2Review the calculation
The formula and context explain how the result was reached.
3Save or share it
Copy your result, print a clean summary, or return from your recent tools.
Your calculation inputs
Calculator values are processed locally in your browser and are not sent to UnitMora's servers. Advertising partners may separately use cookies or similar technologies as explained in the Privacy Policy.
Local calculation. Saving an input stores it in this browser; it does not create a UnitMora account.